Email: [email protected]
Login
Call Us Today 1800 85 75 65
Login
Logo of Coldbuster Floor Heating - Affordable Luxury
Logo of Coldbuster Floor Heating - Affordable Luxury

Running Cost Calculator

Electric floor heating is highly energy-efficient, with remarkably low ongoing running costs.

Below is a simple calculator to give you a very approximate idea of the cost of running underfloor heating.

Feel free to play around with the inputs to determine an approximation of running costs for your floor heating, area by area.

We think you’ll be pleasantly surprised!

Important notes to consider when comparing Coldbuster Floor Heating to any alternative heating option:

  • Coldbuster Floor Heating requires NO ONGOING MAINTENANCE COST.
  • Coldbuster Floor Heating provides a 25 YEAR WARRANTY for floor heaters.

Coldbuster does not warrant or guarantee that your resulting electricity bill will fully reflect these numbers.

This Running Cost Calculator makes many assumptions based on typical scenarios for each heated area. Click here for more information.

Let us know if you need any help, we’ll be happy to assist. The online Learning Centre and FAQ section also have more information for you. Feel free to Contact Us if you have any enquiries.

This Running Cost Calculator makes several assumptions based on typical scenarios for each heated area, including (but not limited to):

  • Room size (compared to heater size)
  • Insulation/ventilation
  • Floor substrate
  • Window Areas and Aspects
  • Ceiling height

For more information on factors that may affect temperature in your home, click here.

When considering the temperature of a room or home with electric floor heating, several important factors come into play:

But please note that these figures are to be used as a rough guide only. Coldbuster does not warrant or guarantee that your resulting electricity bill will fully reflect these numbers.

This Running Cost Calculator makes several assumptions based on typical scenarios for each heated area, including (but not limited to):

  • Room size (compared to heater size)
  • Insulation/ventilation
  • Floor substrate
  • Window Areas and Aspects
  • Ceiling height

These figures are to be used as a rough guide only. Coldbuster does not warrant or Guarantee that your resulting electricity bill will fully reflect these numbers.

comparision
This diagram illustrates how underfloor heating closely resembles the ideal heat for room heating because it places the warmth in the right area.

Why is Coldbuster Floor Heating so cheap to run?

Coldbuster’s PROGRAMMABLE THERMOSTATS are so smart these days: Over the first few days, it ‘learns’ the heating zone. It works backward to figure out the latest to turn on to reach your temperature at your time.

Not only does it minimise the heat-up time, but it also eliminates any guesswork by the user. Then, once it reaches your temperature at your time, it turns off and automatically goes on a duty cycle, so it runs a fraction of the time you want the heat!

If you have or are thinking of installing SOLAR ENERGY, that can further reduce the running costs. Even more so with storage batteries.

And of course: NO ONGOING MAINTENANCE COSTS. Coldbuster’s floor heating is a set-and-forget product!

Need advice or still unsure?

No problem. Coldbuster is here to support you every step of the way. Simply send an email to: [email protected] or call: 1800 85 75 65 if you need any assistance with choosing the right size floor heating system, or if you would like to discuss a quote or how we cost our heating solutions based on your specific floor plan.

Submit your Request for Quote Here

Simply click here to request a highly competitive quote. The Coldbuster Team will jump onto it as soon as possible to provide you with the most competitive customised quote that will delight you. Let us know if there is any urgency and we will do our best to get you your answer when you need it. Whilst you are waiting, please feel free to jump onto the Coldbuster Underfloor Heating Learning Centre, where you will find answers to the most Frequently Asked Questions or Videos.

Buy Online

Check out Australia’s Best Range of Under Floor Heating
View Products

Have an Enquiry?

Reach out and we will do our best to assist you on your project.
Contact Us

Subscribe to our Newsletter

SUBSCRIBE
Logo of Coldbuster Floor Heating - Affordable Luxury
Facebook Youtube Pinterest Linkedin Instagram
  • Copyright © 2026
  • Coldbuster Underfloor Heating
  • All Rights Reserved
  • Sitemap
Back to the top

Key Factors Affecting the Running Costs of Electric Floor Heating from Coldbuster

There are many factors and assumptions that may influence the costs of running electric floor heating.

Please note that the factors and the assumptions that underpin this Running Cost Calculator mean that results should only be used as a rough guide, as conditions (some of which are listed below) can vary greatly.

The efficiency and cost of the electricity used for heating directly impact running costs. More efficient energy sources and favourable electricity tariffs reduce overall expenses. Electricity prices vary by provider and plan. Choosing an energy-efficient tariff and monitoring peak and off-peak rates can help minimise heating costs.

The assumption in this running cost estimate model is that your energy source is cost-effective and the electricity tariff is optimised for heating needs.

The total time the heating system is operational impacts energy consumption. Running the system only when necessary and using programmable thermostats to create heating schedules can optimise usage.
The assumption in this running cost estimate model is that your heating is running only when necessary and optimised accordingly.

A duty cycle for electric underfloor heating represents the percentage of time the system is actively heating versus its total operational time. After the floor reaches its set temperature, the system cycles on and off to maintain it. The calculator factors this in and assumes a 50% duty cycle.

The temperature set on the thermostat directly affects energy usage. Lowering the thermostat temperature by just a few degrees can significantly reduce running costs without compromising comfort. Programmable and smart thermostats can optimise heating schedules, reducing energy use during non-peak times and enhancing overall efficiency. Setting the thermostat to an optimal temperature (e.g., 20-22°C) during occupied times and lowering it (or even better turning it off) when not in use can significantly affect running costs.

The assumption in this running cost estimate model is that you are using one of Coldbuster’s smart programmable thermostats to manage heating schedules effectively and that the settings are optimised for both comfort and efficiency.

Proper insulation reduces heat loss, making the heating system more efficient. Effective insulation in your floors, walls and roofs will help maintain the desired temperature with less energy consumption. Better insulation helps retain heat within the room, minimising the energy required to maintain comfort.  

The assumption in this running cost estimate model is that your building has high-quality insulation materials installed in the walls, roof, and floor.

The type of floor substrate affects heat retention and energy efficiency. Concrete floors, for example, retain heat longer, while timber floors may require more energy to maintain warmth.
The assumption is that your floor substrate is conducive to efficient heating, with thermal insulation boards used where necessary to enhance heat retention.

Different floor coverings have varying thermal properties. Materials like tile and stone conduct heat efficiently, while carpets and wood may require higher energy to achieve the same comfort level.
The assumption in this running cost estimate model is that your flooring material is chosen with consideration of its thermal conductivity and compatibility with the heating system.

Draughts from poorly sealed windows and doors, as well as other gaps, can lead to heat loss and increased energy consumption. The type and quality of windows and doors significantly impact heat loss and gain. Double-glazing and well-sealed frames reduce draughts and improve thermal efficiency.
The assumption in this running cost estimate model is that your windows, doors, and other potential gaps are well-sealed to prevent drafts and heat loss.

The overall energy efficiency of a building, including factors like construction quality, age, design and energy ratings, all affect its thermal efficiency and hence impacts heating costs. Older buildings may have more heat loss compared to newer, energy-efficient constructions.

The assumption in this running cost estimate model is that your building is relatively modern or has been updated to meet contemporary energy efficiency standards.

The local climate influences heating needs. Colder outdoor temperatures increase the demand for indoor heating. Regions with milder winters require less heating and would therefore typically have lower running costs compared to areas with harsh winter and cold conditions.

The assumption in this running cost estimate model is based on average climatic conditions specific to the region in Australia where you are located and where the system is installed.

The efficiency of the underfloor heating system itself plays a crucial role. The efficiency determines how effectively it converts electrical energy into heat. Modern systems with advanced controls and high efficiency like Coldbuster use less energy to achieve the desired warmth.
The assumption in this running cost estimate model is that your heating system is running efficiently at all times. 

The ability to control heating in different zones or rooms independently allows for more precise energy use, heating only the areas that need it.

The assumption in this running cost estimate model is that your heating system is designed with zoning capabilities for customised temperature control.

The design of the heating system, including the layout, spacing, and type of heating elements, affects heat distribution and overall efficiency. The size of the room in relation to the heater’s capacity is crucial. An appropriately sized heater ensures efficient heating without overworking the system.

The assumption in this running cost estimate model is that your heating system is designed and installed by experienced Coldbuster installation professionals or other suitably qualified professionals to ensure optimal performance and energy efficiency.

Consistent and predictable usage patterns help in planning and optimising energy consumption. Irregular or excessive use can lead to higher costs.

The assumption in this running cost estimate model is that your usage patterns are regular and not excessive.

Higher ceilings result in larger volumes of air to heat, which can increase energy consumption. Rooms with standard ceiling heights are more energy efficient.

The assumption in this running cost estimate model is that your ceiling heights are standard (2.4 to 2.7 meters) to maintain optimal energy efficiency and minimize excess energy use.